Now available on our site is the complete BBS RS wheel application guide. This guide has every RS ever made and what vehicle it came with from the factory. Furthermore, it has sizes, offsets, lips, and barrel sizes. If you have info for the few BBS RS wheels not on this list, please contact us with the specs seen on the page.
Late Mk2 Scirocco Fuse Box
Here is a quick diagnostic tip for scirocco crank no start situations. Remove the fuel pump relay from your fuse box. Make a jumper wire with a male spade on either end of a 12-14 gauge wire. Put the jumper in the slots with the terminal that is opposite from the others (14) and the one directly across from that (13). This is the power to turn the fuel pump on and off for this relay. (see the Mk2 diagram) Mk1 relays are above that location and have the identical pin out.
Once you have this plugged in, you should hear the fump pump turn on. Crank the engine over right away or else it will flood the engine.
Mk1 & Early Mk2 Example. * Remove the relay on the bypass connection panel on top of the fuse box. The pin out looks the same as the late Mk2 diagram above.
020 Flange Types – old 90mm,
new 90mm, and 100mm
BrokeVW.com made this page to show the different 020 Flange Types, and explain which swap around.
HistoryAs far as I am aware, there are 3 kinds of 020 5-speed flanges. I call them
old style 90mm, new style 90mm, and 100mm.
Trans before 1983 used the old 90mm, from 1983/4 they went to the new style
90mm flange, and in the MK2 years they introduced the 100mm flange, which is
just like the 90mm flange, only 10mm larger around and a bit taller.
Our Mk2 Scirocco Subwoofer Enclosure are made in house at WCR South in California.
These sub enclosures are designed to fit perfectly in the right trunk pocket of your 1982-
1992 Mk2 Volkswagen Scirocco.
We built an enclosure to fit inside this void. Then we casted the area around the void so the subwoofer enclosure fits perfectly. After that, we hand crafted a silicone clam shell mother mold for production use.
After the mold was complete, we are able to cast fiberglass enclosures for your Scirocco. These are painstakingly made one at a time to ensure the quality is perfect. Furthermore, once installed, there zero interference with the rear parcel tray. This makes your sub easily concealable.
Our Mk2 Scirocco Subwoofer Enclosure comes raw, with 1630 epoxy gel coat. If you would like to add your own ports, you can easily cut a hole in the back with a hole saw. Seal the terminals with silicone once you install it. Also fill the enclosure about 50% with polyfill (pillow stuffing). These can be carpeted or sanded, primed and painting to a gloss finish as well. Do not silicone your subwoofer to this inclosure. Doing so could damage your sub or your enclosure.
Carpet, subwoofer, wire port terminal, and polyfill are not included.
WestCoastRoccos.com is back open this week. We are currently filling orders, when we were closed last week. We are processing them in the order received. You will receive a email when your order’s shipping label was made and packed. Most order ship the following morning. If you have any other questions email us. It may take about 24-48 hours to get back to you due to the volume of emails. Thank you for your patience.
We will be closed May 3rd – 12th. If you place any orders on our shop between these dates, we will still receive your order. However, those orders will not ship out until Monday the 13th. Thank you for your patience.
Finish off your project with a Scirocco Coolant Tag. These are regularly damaged or missing from Mk2 Sciroccos. These also fit other VWs such as late Cabriolet, Mk2 Golf, & Mk Jettas, just to name a few. If you’re doing a restoration or refurbishing your Scirocco, this is one of those details that you’re probably missing. This will make your project complete and look like a factory fresh ‘Rocco. We always say, it’s the last 1% of the details that are the most crucial. (coolant bottle and cap not included).
You can find these by clicking here or stop by WCR North located here.
WCR ia happy to announce that our Bullet Proof Rebuildable 020 Relay Shaft Levers are now available for sale. 
Our relay levers are made from Polycarbonate Carbon Fiber (PC-CF). Designed and manufactured in house at WCR North.These fit all Mk1 & Mk2 Scirocco w/ a 5 speed 020 transmission.They will also fit Mk1 Rabbit, Mk1 Jetta, Mk1 Rabbit Convertible, Mk1 & Mk1.5 Cabriolet, & Mk1 Caddy / Pickup platforms with a 020 5 speed. Click on the link to see all years and models. These relay levers are made with rebuildable ball ends, which are also available.
As of March 1st, 2024, we have many new items in the store now. See below for the list of new items we’ve added in the last couple of weeks. Also, if there is something you are looking for that we do not have, contact us and we’ll try and find it for you.
 Holding Straps |
 OES First Aid Kits |
|---|---|
 Fuse &. Light Bulb Kits |
 Headlight Adjuster Screws – 44mm-Long |
 Genuine VW Scirocco 16v – Front Lower K-Bars |
 Fuel Tank Mounting Straps |
Check out all our products on our Mk1 & Mk2 shop pages as well.
Are your having problems identifying gauge cluster issues on your Scirocco? If you are experiencing any of the following symptoms, you might need a new gauge cluster voltage regulator:
Oil Pan Bolt Kit - w/ Windage Tray or Oil Pan Baffle
$29.99
16v Head Bolt Kit
$79.99
Lower Steering Column Bearing Retainer Lock
$29.99
16v Exhaust Clamp
$18.99
Steering Column Bearing Ring Retaining Clip
$19.99
CAI MAF Seal
$19.99
Copper Ground Terminals
Price range: $4.00 through $8.00
Scirocco Battery Terminal Kit - 1 Positive - 1 Negative
$34.99
Mk1 Side Mirror Gasket
$9.99
Air Conditioning Heater Climate Control Assembly Mechanism
$999.99
